As the most common titanium alloy, 6AL4V has numerous applications and a large industry presence. It is especially used in high strength, lightweight applications. As the leading titanium alloy, it can help design engineers identify potential areas where they can use titanium alloys instead of higher cost or longer lead time alloys.
Why do engineers prefer 6AL4V?
The strength-to-weight ratio of 6AL4V is attractive. It has a tensile strength greater than that of commercially pure titanium and much less weight than steel with comparable tensile strength. It is ideal for applications that require parts to withstand a corrosive environment such as seawater, chlorides, and process environments. It also has useful elevated temperature properties. 6AL4V is used for airframe structures, engine components, fasteners, and fittings, as well as, subsea equipment, high performance motorsport equipment, and medical devices.
Understanding grades and variants
When buying alloys, you may see many different designations for what looks like the same material. Grade 5 is the standard. Grade 23, also known as 6AL4V ELI (extra low interstitials), has lower limits on oxygen, nitrogen, carbon and iron, making it easier to manufacture and increase fracture toughness and ductility. It is requested for many critical aerospace components and implantable medical devices. Grades 1-4 are even easier to work with, but are not as strong. Be sure to ask what grade your drawing calls for, and don’t assume a lower grade is allowed.
Heat Treatment Considerations
The standard conditioning of 6AL4V is annealing, which gives an acceptable balance of strength, ductility and machinability. While it can be solution treated and aged to be stronger, thicker sections will not harden all the way through. Typical annealing occurs at temperatures 700 to 785 degrees Celsius. Cycle times will depend on the governing specification. When heat treating after machining, account for distortion and the alpha case (a brittle, oxygen-rich surface layer) which forms on the surface of the alloy in contact with air during the heat treatment. Specify vacuum or controlled-atmosphere treatment if the surface of the part cannot come in contact with air.
Working with titanium can be challenging. It requires the use of special tools, additional time, and higher costs. Be sure to factor in the costs of the tooling and time for the machining into your estimates, and try to find near-net-shape metal from your supplier to minimise the amount of stock you have to remove.
When it comes to titanium, certification can be just as important as the metal itself. Various forms of titanium, such as sheet and strip, bar and forgings, as well as product forms included in AMS 6931, may also be covered by ASTM B348. It is always a good idea to request a full mill certificate and ensure that traceability is maintained from the beginning to the end of the process, i.e. from the melt to the finished part. Inform your customers of any special requirements you may have (melt source, ultrasonic testing, etc.) before placing the order.
When to Spec It, and When Not To
Use 6AL4V when weight saving, corrosion resistance, and high strength are all crucial and the component justifies the added cost of the material and machining. If the application is mostly about corrosion resistance, a commercially pure grade may work at a lower cost with easier forming. If the part is subjected to very high temperatures or is not weight critical, a stainless steel or nickel alloy may be more economical. If the application is a sliding/wear application, remember that titanium has poor galling resistance and requires surface treatment.
Working with Your Stockholder
Working with an experienced stockholder helps with the balancing game of performance, cost, and safety. Be prepared to provide the specification you require when talking to your stockholder (grade, size, tolerance, certification, etc.), especially if you are requiring small quantities of an atypical product. Consider stocking the items you use regularly. Your stockholder may be able to suggest a cutting service to better meet your performance, cost, and safety requirements.